|
|
||
| New Directions, 900 Echols Street SE, Vienna, VA 22180 | 703-319-0840 | Email |
|
START GATES
There are two basic categories of Remote Start Gates: Latch Activation, and Full Motion Latch Activation is the most economical, as it makes use of your existing start gate. It depends upon you to reset your gate by hand as you would normally do before each race. Here are three best selling Latch Activation mechanisms for popular track formats.
Latch Activation requires that you have a start gate that is spring-loaded, and "wants to open". Many tracks, especially those which are home built, have gates that are the opposite: They are spring, or rubberband loaded so that they "want to close". In these cases, it is usually possible to make a few simple changes to reconfigure, and make it feasible to use Latch Activation. We will work with you to see if this is possible in your case. Full Motion is the other activation method we offer. As the name implies, the power of the solenoid is applied to the rotation of the peg bar. Once the power to the solenoid has ended, the gate returns by spring power to the closed state. In most cases, we make a complete custom start mechanism which you install on your track. The picture at the top of this page shows a full motion gate for a 4 Lane BestTrack. To learn more about Full Motion gates, click HERE See our Light Tree and Remote Start Gate in action! Contact: New Directions, 900 Echols Street SE, Vienna, VA 22180 | 703-319-0840 | Email |
|||||||||
|
|
|||||||||